products: finish paints

Eco-Brite® Flat Latex

Code: 7201
Product Description
A high performance pure acrylic enamel formulated to near zero VOC levels (<5gr/l) resulting in a low odour more environmentally friendly product.

Uses
A fast drying, high performance flat latex enamel, designed for interior application particularly in areas where a durable, washable finish is required.
The low odour and low VOC levels make this product ideal for sensitive areas such as hospitals, schools, retirement homes, and other occupied buildings.
Technical data
Gloss: Flat (3-5/60º Head) (5-10/85º Head) Std
Colour: White
Tint Range: as req’d using low VOC colorants
RECOMMENDED # of coats: 1-2 @ recommended coverage
Theoretical Coverage: 30-40 square meters/3.7 L (320-430 sq. Ft/gal)
Volume Solids: 46% (approx)
Specific Gravity: 1.4
Flash Point: Not applicable
Thinner: Water if req’d (thin up to 10% if spraying)
Surface preparation
Surfaces must be clean, dry and free from dust, grease and wax.
Remove any loose and peeling paint and repair using patching compound,
Prime using latex primer such as Verda’s Prima or Stock Primer.
Glossy surfaces should be scuff sanded and primed using an acrylic primer.
Application
Brush, Roller or Spray
Dry time @ 20°C & 50% R.H.
Touch: 15-30 min
Handle: 1-2 hrs.
Recoat: 2-4 hrs.
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.


Verda UNO Flat White Latex [blue label]

Code: 3201
Product Description
A high performance contractor product designed for properly prepared interior walls and ceilings. Hiding and sheen are such that one coat my suffice.

Uses
A fast drying flat latex designed for all interior applications where a high hiding product is required. In some applications product maybe suitable for ceilings.
Technical data
Gloss/Sheen: Flat Standard
Colour: White
Tint Range: As required Recommended
Number Of Coats: 1 is usually sufficient
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 53.5% by vol. 32.0%
Specific Gravity: 1.46
Flash Point: N/A
Surface preparation
Surfaces must be clean and dry and dust free.
All surfaces must be primed with a latex primer such as Verda's Stock Primer.
Application
Brush, Roller or Spray
Dry time(@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2 hrs +
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.


UNO Flat White Latex [Yellow label]

Code: 3210
Product Description
A high performance contractor product designed for properly prepared interior walls and ceilings. Hiding and sheen are such that one coat my suffice.

Uses
A fast drying flat latex designed for all interior applications where a high hiding product is required. In some applications product maybe suitable for ceilings.
Technical data
Gloss/Sheen: Flat
Standard Colour: White
Tint Range: As required Recommended
Number Of Coats: 1 is usually sufficient
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 53.5% by vol. 32.0%
Specific Gravity: 1.46 Flash Point: N/A
Surface preparation
Surfaces must be clean and dry and dust free.
All surfaces must be primed with a latex primer such as Verda's Stock Primer.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2 hrs +
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.

NOTE: Product is specifically formulated for increased hiding over 3201 Blue Label and is marketed for the repaint area of construction.


Verda Forte Semi Gloss Acrylic Enamel

Code: 8701
Product Description
A pure acrylic product formulated for maximum durability and adhesion over properly prepared substrates. Surface must be clean, dry and free from dust, grease or wax. Remove any loose or peeling paint and prime with an acrylic primer such as Verda's 2001.

Uses
A primer 100% acrylic enamel formulated for all interior or exterior substrates where a high hiding, durable product is required.
Technical data
Gloss: 40-60 (60ºhead)
Standard Colour: White
Colours: Available
Recommended Number Of Coats: 1 is usually sufficient
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 51.3% by vol. 37.2%
Specific Gravity: 1.28 Flash Point: N/A
Surface preparation
Surfaces must be clean, dry and free from dust, grease and wax.
Remove any loose and peeling paint and repair using patching compound, Prime using latex primer such as Verda’s Prima or Stock Primer.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Dust Free: 1-2 hours
Handle: 6-8 hrs.
Hard Dry: 24 hrs minimum
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.




Forte Exterior Acrylic Flat

Code: 8501
Product Description
Product is 100% acrylic and is formulated for maximum durability and adhesion over properly prepared exterior structures.

Uses
A premium 100% acrylic enamel designed for all exterior applications where a high hiding, durable product is required.
Technical data
Gloss: Low sheen-flat Standard
Colour: White
Colours: Available
Tint Range: As required Recommended
Number Of Coats: 1 is usually sufficient over properly prepared substrates.
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 53.3% by vol. 36.5%
Specific Gravity: 1.39
Flash Point: N/A
Surface preparation
Surface must be clean, dry and free from dust and dirt.
Remove any loose or peeling paint and prime with 100% acrylic primer such as Verda's 2001.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.


Forte Garage Acrylic White

Code: 8201
Product Description
Product is 100% acrylic and is formulated for maximum durability and adhesion over properly prepared substrates. Product may also be used successfully on all exterior substrates.

Uses
A premium 100% acrylic enamel designed for all underground garage applications, where a hiding durability product is warranted.
Technical data
Gloss: Low sheen-flat Standard
Colour: White
Recommended Number Of Coats: 1 is usually sufficient
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 48.8% by vol. 29.5%
Specific Gravity: 1.37
Flash Point: N/A
Surface preparation
Surface must be clean and dry and free from dust or dirt.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.


Prima Ceiling Latex Flat

Code: 5101
Product Description
A high performance, high hiding product formulated for low VOC levels and excellent uniformity when applied to properly prepared ceilings.

Uses
A quick drying premium latex product specifically formulated for interior ceilings. The low odor and low VOC makes this product ideal for all sensitive areas.
Technical data
Gloss: Flat Standard
Colour: White
Recommended Number Of Coats: 1-2 at recommended spread rate
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 52.0% by vol. 31.0%
Specific Gravity: 1.45
Flash Point: N/A
Thinner: Water if required
Surface preparation
Surface must be clean and dry.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.




Prima Interior Washable Flat

Code: 5201
Product Description
A high performance acrylic modified enamel with low VOC resulting in a low odor enamel which is environmentally friendly.

Uses
A fast drying high performance flat latex enamel formulated for interior application particularly in areas where durable and washable finish is required.
The low odor and low VOC levels make this product ideal for interior rooms and hallways where and washable finish may be required.
Technical data
Gloss: Flat Standard
Colour: White
Tint Range: As Required Recommended
Number Of Coats: 1-2 @ recommended spread rates
Theoretical Coverage: 30-40 square metres/ 3.7 L (350-450 sq. ft./ gal)
Solids: by wt. 56.3% by vol. 37.6%
Specific Gravity: 1.46
Flash Point: Not Applicable
Thinner: Water if required (thin up to 10% for spraying)
Surface preparation
Surfaces must be clean, dry and free from dust, grease and wax.
Remove any loose and peeling paint and repair using patching compound, Prime using latex primer such as Verda’s Prima or Stock Primer.
Glossy surfaces should be scuff sanded and primed using an acrylic primer.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.




Prima Interior Semi-Gloss Enamel

Code: 5701
Product Description
A modified acrylic semi gloss finish formulated for low VOC resulting in a low odor environmentally friendly product

Uses
A fast drying interior semi gloss designed as a finish coat for properly prepared surfaces, such as , dry wall and wood
Technical data
Type: Modified acrylic
Gloss: Semi gloss 40- 70( 60º Head) Std
Colour: White
Tint Range: As required
Recommended number of coats: 1-2@ recommended coverage
Theoretical Coverage: 30-40 square metres/ 3.7 litres (320-430 sq. ft/ gal.)
Total Solids: 48% by wt. 37.02% by volume
VOC: 80 g/L
Specific Gravity: 1.28
Flash Point: not applicable
Thinner: Water if required (thin up to 10% for spray)
Surface preparation
Surfaces must be clean, dry and free from dust, grease and wax.
Remove any loose or peeling paint and prime using a suitable primer.
Glossy surfaces should be scuff sanded and primed using an arylic primer.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.




Verda Pro Interior Latex Washable Flat Finish

Code: 1200
Product Description
This acrylic latex paint is made from high quality pigments and binders, which give it excellent hiding properties and provides a beautiful matte flat finish. Ideal for bedrooms, living rooms and dining rooms.

Uses
Interior walls and ceilings.
Drywall, plaster, wood, concrete, concrete blocks, etc.
Features
High hiding one coat is enough to cover most primed and sealed surfaces.
Washable, non-yellowing contains no lead or mercury, low odour, easy to apply, durable, quick drying, non-toxic.
Its flat finish minimizes surface irregularities and provides a nice uniform appearance.
Application & Clean Up
Stir thoroughly before using.
Apply un-thinned by brush, roller or spray gun.
Surface temperature should be above 10°C, but not more than 32°C.
Clean tools with warm soapy water immediately after use.
Colours - Tinting
White. Tint according to formulae.

Flash Point
Non-Flammable
Gloss: 0-2
Spreading Rate: Up to 10 square meters per litre.
Drying Time
To Touch: 1 hour
Recoat: 4 hours
Storage: Keep from freezing.
Surface Preparation
Surface must be clean, dry and free of dirt, dust, glue, grease, oil, rust, soap, wax or any other contaminations.
Patch all cracks and holes with a water based patching compound, let dry thoroughly and sand.
Apply Verda’s Latex Primer & Sealer/Undercoater.
Remove all loose paint, scrape and sand.
Glossy surfaces should be dulled by sanding to ensure proper adhesion.
New Wood: Sand wood to a smooth surface and seal all knots and sappy areas with shellac then apply Verda’s Alkyd Primer & Sealer prior to applying latex or alkyd topcoat.
Drywall: Prime with Verda’s Latex Primer & Sealer/Undercoater.
Cautions
Allow 7 days before washing.
Use a mild detergent and a soft cloth. Rinse well.
Abrasive cleaner not recommended.



Verda Pro Interior Latex Eggshell Finish