products: finish paints

Eco-Brite® Flat Latex

Code: 7201
Product Description
A high performance pure acrylic enamel formulated to near zero VOC levels (<5gr/l) resulting in a low odour more environmentally friendly product.

Uses
A fast drying, high performance flat latex enamel, designed for interior application particularly in areas where a durable, washable finish is required.
The low odour and low VOC levels make this product ideal for sensitive areas such as hospitals, schools, retirement homes, and other occupied buildings.
Technical data
Gloss: Flat (3-5/60º Head) (5-10/85º Head) Std
Colour: White
Tint Range: as req’d using low VOC colorants
RECOMMENDED # of coats: 1-2 @ recommended coverage
Theoretical Coverage: 30-40 square meters/3.7 L (320-430 sq. Ft/gal)
Volume Solids: 46% (approx)
Specific Gravity: 1.4
Flash Point: Not applicable
Thinner: Water if req’d (thin up to 10% if spraying)
Surface preparation
Surfaces must be clean, dry and free from dust, grease and wax.
Remove any loose and peeling paint and repair using patching compound,
Prime using latex primer such as Verda’s Prima or Stock Primer.
Glossy surfaces should be scuff sanded and primed using an acrylic primer.
Application
Brush, Roller or Spray
Dry time @ 20°C & 50% R.H.
Touch: 15-30 min
Handle: 1-2 hrs.
Recoat: 2-4 hrs.
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.


Verda UNO Flat White Latex [blue label]

Code: 3201
Product Description
A high performance contractor product designed for properly prepared interior walls and ceilings. Hiding and sheen are such that one coat my suffice.

Uses
A fast drying flat latex designed for all interior applications where a high hiding product is required. In some applications product maybe suitable for ceilings.
Technical data
Gloss/Sheen: Flat Standard
Colour: White
Tint Range: As required Recommended
Number Of Coats: 1 is usually sufficient
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 53.5% by vol. 32.0%
Specific Gravity: 1.46
Flash Point: N/A
Surface preparation
Surfaces must be clean and dry and dust free.
All surfaces must be primed with a latex primer such as Verda's Stock Primer.
Application
Brush, Roller or Spray
Dry time(@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2 hrs +
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.


UNO Flat White Latex [Yellow label]

Code: 3210
Product Description
A high performance contractor product designed for properly prepared interior walls and ceilings. Hiding and sheen are such that one coat my suffice.

Uses
A fast drying flat latex designed for all interior applications where a high hiding product is required. In some applications product maybe suitable for ceilings.
Technical data
Gloss/Sheen: Flat
Standard Colour: White
Tint Range: As required Recommended
Number Of Coats: 1 is usually sufficient
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 53.5% by vol. 32.0%
Specific Gravity: 1.46 Flash Point: N/A
Surface preparation
Surfaces must be clean and dry and dust free.
All surfaces must be primed with a latex primer such as Verda's Stock Primer.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2 hrs +
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.

NOTE: Product is specifically formulated for increased hiding over 3201 Blue Label and is marketed for the repaint area of construction.


Verda Forte Semi Gloss Acrylic Enamel

Code: 8701
Product Description
A pure acrylic product formulated for maximum durability and adhesion over properly prepared substrates. Surface must be clean, dry and free from dust, grease or wax. Remove any loose or peeling paint and prime with an acrylic primer such as Verda's 2001.

Uses
A primer 100% acrylic enamel formulated for all interior or exterior substrates where a high hiding, durable product is required.
Technical data
Gloss: 40-60 (60ºhead)
Standard Colour: White
Colours: Available
Recommended Number Of Coats: 1 is usually sufficient
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 51.3% by vol. 37.2%
Specific Gravity: 1.28 Flash Point: N/A
Surface preparation
Surfaces must be clean, dry and free from dust, grease and wax.
Remove any loose and peeling paint and repair using patching compound, Prime using latex primer such as Verda’s Prima or Stock Primer.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Dust Free: 1-2 hours
Handle: 6-8 hrs.
Hard Dry: 24 hrs minimum
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.




Forte Exterior Acrylic Flat

Code: 8501
Product Description
Product is 100% acrylic and is formulated for maximum durability and adhesion over properly prepared exterior structures.

Uses
A premium 100% acrylic enamel designed for all exterior applications where a high hiding, durable product is required.
Technical data
Gloss: Low sheen-flat Standard
Colour: White
Colours: Available
Tint Range: As required Recommended
Number Of Coats: 1 is usually sufficient over properly prepared substrates.
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 53.3% by vol. 36.5%
Specific Gravity: 1.39
Flash Point: N/A
Surface preparation
Surface must be clean, dry and free from dust and dirt.
Remove any loose or peeling paint and prime with 100% acrylic primer such as Verda's 2001.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.


Forte Garage Acrylic White

Code: 8201
Product Description
Product is 100% acrylic and is formulated for maximum durability and adhesion over properly prepared substrates. Product may also be used successfully on all exterior substrates.

Uses
A premium 100% acrylic enamel designed for all underground garage applications, where a hiding durability product is warranted.
Technical data
Gloss: Low sheen-flat Standard
Colour: White
Recommended Number Of Coats: 1 is usually sufficient
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 48.8% by vol. 29.5%
Specific Gravity: 1.37
Flash Point: N/A
Surface preparation
Surface must be clean and dry and free from dust or dirt.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.


Prima Ceiling Latex Flat

Code: 5101
Product Description
A high performance, high hiding product formulated for low VOC levels and excellent uniformity when applied to properly prepared ceilings.

Uses
A quick drying premium latex product specifically formulated for interior ceilings. The low odor and low VOC makes this product ideal for all sensitive areas.
Technical data
Gloss: Flat Standard
Colour: White
Recommended Number Of Coats: 1-2 at recommended spread rate
Theoretical Coverage: 30-40 square metres/ 3.7 L
Solids: by wt. 52.0% by vol. 31.0%
Specific Gravity: 1.45
Flash Point: N/A
Thinner: Water if required
Surface preparation
Surface must be clean and dry.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.




Prima Interior Washable Flat

Code: 5201
Product Description
A high performance acrylic modified enamel with low VOC resulting in a low odor enamel which is environmentally friendly.

Uses
A fast drying high performance flat latex enamel formulated for interior application particularly in areas where durable and washable finish is required.
The low odor and low VOC levels make this product ideal for interior rooms and hallways where and washable finish may be required.
Technical data
Gloss: Flat Standard
Colour: White
Tint Range: As Required Recommended
Number Of Coats: 1-2 @ recommended spread rates
Theoretical Coverage: 30-40 square metres/ 3.7 L (350-450 sq. ft./ gal)
Solids: by wt. 56.3% by vol. 37.6%
Specific Gravity: 1.46
Flash Point: Not Applicable
Thinner: Water if required (thin up to 10% for spraying)
Surface preparation
Surfaces must be clean, dry and free from dust, grease and wax.
Remove any loose and peeling paint and repair using patching compound, Prime using latex primer such as Verda’s Prima or Stock Primer.
Glossy surfaces should be scuff sanded and primed using an acrylic primer.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 15-30 minutes
Handle: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.




Prima Interior Semi-Gloss Enamel

Code: 5701
Product Description
A modified acrylic semi gloss finish formulated for low VOC resulting in a low odor environmentally friendly product

Uses
A fast drying interior semi gloss designed as a finish coat for properly prepared surfaces, such as , dry wall and wood
Technical data
Type: Modified acrylic
Gloss: Semi gloss 40- 70( 60º Head) Std
Colour: White
Tint Range: As required
Recommended number of coats: 1-2@ recommended coverage
Theoretical Coverage: 30-40 square metres/ 3.7 litres (320-430 sq. ft/ gal.)
Total Solids: 48% by wt. 37.02% by volume
VOC: 80 g/L
Specific Gravity: 1.28
Flash Point: not applicable
Thinner: Water if required (thin up to 10% for spray)
Surface preparation
Surfaces must be clean, dry and free from dust, grease and wax.
Remove any loose or peeling paint and prime using a suitable primer.
Glossy surfaces should be scuff sanded and primed using an arylic primer.
Application
Brush, Roller or Spray
Dry time (@ 20°C & 50% R.H.)
Touch: 1-2 hours
Recoat: 2-4 hours
Miscellaneous information
If mildew is present, surface should be washed using a bleach solution and thoroughly rinsed before painting.




Verda Pro Interior Latex Washable Flat Finish

Code: 1200
Product Description
This acrylic latex paint is made from high quality pigments and binders, which give it excellent hiding properties and provides a beautiful matte flat finish. Ideal for bedrooms, living rooms and dining rooms.

Uses
Interior walls and ceilings.
Drywall, plaster, wood, concrete, concrete blocks, etc.
Features
High hiding one coat is enough to cover most primed and sealed surfaces.
Washable, non-yellowing contains no lead or mercury, low odour, easy to apply, durable, quick drying, non-toxic.
Its flat finish minimizes surface irregularities and provides a nice uniform appearance.
Application & Clean Up
Stir thoroughly before using.
Apply un-thinned by brush, roller or spray gun.
Surface temperature should be above 10°C, but not more than 32°C.
Clean tools with warm soapy water immediately after use.
Colours - Tinting
White. Tint according to formulae.

Flash Point
Non-Flammable
Gloss: 0-2
Spreading Rate: Up to 10 square meters per litre.
Drying Time
To Touch: 1 hour
Recoat: 4 hours
Storage: Keep from freezing.
Surface Preparation
Surface must be clean, dry and free of dirt, dust, glue, grease, oil, rust, soap, wax or any other contaminations.
Patch all cracks and holes with a water based patching compound, let dry thoroughly and sand.
Apply Verda’s Latex Primer & Sealer/Undercoater.
Remove all loose paint, scrape and sand.
Glossy surfaces should be dulled by sanding to ensure proper adhesion.
New Wood: Sand wood to a smooth surface and seal all knots and sappy areas with shellac then apply Verda’s Alkyd Primer & Sealer prior to applying latex or alkyd topcoat.
Drywall: Prime with Verda’s Latex Primer & Sealer/Undercoater.
Cautions
Allow 7 days before washing.
Use a mild detergent and a soft cloth. Rinse well.
Abrasive cleaner not recommended.



Verda Pro Interior Latex Eggshell Finish

Low VOC to Zero VOC Quality wholesale paints in Toronto.Verda paints

Interior paint finishes Verda Paints
There are many different types of interior paint finishes, all of which refer to the final paint finish's reaction to light. A description of interior latex paints listed below.

Interior latex faints:Verda Paints
Flat / Matte
This type of paint does not consist of any real gloss or sheen, and reflects light instead of absorbing it. Typically recommended to new painters, it is easy to apply and has a forgiving quality known to hide surface imperfections, brush and roll on marks. Due to its propensity to absorb moisture and fade over time, Matte Finish paints are ideal for areas in the home that do not require frequent cleaning or are exposed to high humidity.

Eggshell
This type of paint is similar to a matte finish but known to elude a hint of glossy sheen. As with the Canvas Home Basics Line of Paint, Eggshell paint finishers are known to be interchangeable with matte paint consisting of minimum glow.

Satin Finish Verda Paints
This type of paint is considered the middle ground between Matte Finish and Semi-High Gloss Finish paint. Most designers discourage painters from using anything higher than Satin paint finish for any rooms apart from the bathroom and kitchen. This paint is not shiny but does have a smooth gloss. Satin Finish is not ideal for hiding surface imperfections as well as the Egg shell paint.

Semi-gloss / High-gloss Verda Paints
This type of pain is known to and the paint is known to discolour overtime due to their ability to reflect light instead of absorbing it and show many surface imperfections. Commonly used in the higher traffic areas and surfaces that require constant washing, these paints are usually chosen for trim, furniture, cabinets, kitchens and bathrooms.


Painters Serving Painters!
Establish October 2007, Verda is a family owned manufacturing company dedicated to providing optimum quality paint. Favoured for our family feel and extensive knowledge of paint, we are painters by trade who understand the depths of quality painting. Employing seven of the most experienced paint specialists in the country, Verda is most reputable for providing the most superior products with exceptional results. With our enormous stock of indoor and outdoor paint products displayed in thousands of homes across Canada, Verda consistently provides customers with nothing but the best! One more reason to choose Verda Paints!


If you wish to contact us, we encourage you to do so. Simply, call us or email one of our representatives. We will do our best to help you.

Phone: 905-264-1744
Fax: 905-264-8364

VERDA PAINTS
80 Ashbridge Circle, Units 1-4
Woodbridge, ON L4L 3R5
Canada

tony@verdapaints.com
rino@verdapaints.com
glen@verdapaints.com
peter@verdapaints.com
chris@verdapaints.com
bryan@verdapaints.com

Best Paints in canada

Industrial paints are well known as protective coatings. As the name indicates, the industrial paint had only applications in industries where the aesthetics had no importance. With the great advancements in technology, today’s industrial paints are protective and have great aesthetic values too. The protective nature of the industrial paint along with offering a great look to the painted area has made it to be used in painting homes too. Researches indicate that the industrial paint can protect the homes from humidity, moisture and extreme temperatures. This protective nature of the industrial paint preserves the beauty of the homes for ages to come.
Unlike choosing a vendor for the traditional paints, there are several factors that have to be considered for finding the best supplier of the Industrial paint. This is one of the most important factors to be considered. The industrial paint vendor should be well aware of the application type so that he can supply the best paint you are looking for. For example, if you are about to buy industrial paint for painting your garage, you have to give preference to the protectiveness rather than the aesthetics. Remember the fact that choosing the industrial paint by yourself without any knowledge about the same is a very hard task. The industrial paint vendor should be ready to help you in choosing the right paint.

The Price Factor

Recent statistics indicate that there are many representatives and middlemen out there who supply the industrial paint for almost double the market rate. There are even some cases where these representatives adulterate the industrial paint and supply them for very cheap prices. Hence it is always good to avoid middlemen and buy the industrial paint from direct vendors. Quality checking is a critical aspect in the case of industrial paints. If you are not sure about checking the quality of industrial paint, you should never avoid getting assistance for that or as an alternative you can buy industrial paint from trusted sources like the verda paints .

Demand & Supply

Some of the industrial paint suppliers often run out of stock in the midway of the project. This will create a huge loss for the entire project and stops it from progressing. So if you are ordering industrial paint for huge projects, you should make sure that the industrial paint vendor of your choice has enough stock with them.

Choosing the industrial paint vendor based on the factors mentioned above will help you to make your project cost effective than ever before.

There are many factors that need to be considered while choosing the paint suppliers.

Toronto kitchen design by Andros Kitchens

Large number of people prefers to remodel their kitchen Few better options exist if you desire to add new life to your home. After all, the kitchen is the most used room in the modern home. It's used for dining and cooking, certainly, but it is also a gathering place for family and friends. Therefore, changing the look and feel of your kitchen is an excellent option, particularly if your kitchen is a bit dated. What new expansions can you find for Toronto kitchen design?

New Appliances - Every one loves new appliances. If your kitchen appliances are outdated and awful, it's right time for an up gradation. The contemporary appliances come with advanced technology and can give improved functionality to your kitchen with additional fun.

One of the most popular additions for a new kitchen design is that of an under-counter wine cooler. These can be found with clear, glass walls and doors, or they can be outfitted with wood paneling to match your kitchen cabinetry. With addition of a wine cooler to your kitchen, you can make extra space in your cold storage and it can also allow you to increase your vintage collection.

Another popular appliance for new Toronto kitchen design is that of dual, side-by-side ovens. You'll come across various advantages of these dual ovens. Both ovens work independently, therefore you can cook in both, utilize one for baking and other for warming, or any arrangement of different tasks. You will also that dual ovens are quite an attention-grabbing addition to your kitchen.

Another option is installation of wall-mounted oven and microwave. Such ovens are easy to use and give an additional cabinet space for other needs. Modern microwaves are more multipurpose as compare to the old ones and some microwave ovens offer the benefit of convection.

Lighting Choices - Replacement of lighting pattern of your kitchen is one the in demand option in Toronto kitchen design. Simply adding under-counter task lighting to new or existing cabinetry can give your kitchen a new look, as well as greater functionality. You might opt to add track lighting to the ceiling, or install recessed lighting as well.

Your choices in lighting should reflect the overall theme of your kitchen design, though. There are various latest designs are available which actually integrate into the fixtures inside the kitchen and give a perfect look.No matter what your budget is Andros Kitchen designs will make sure you ll get the best deal for your money.

best Paints in canada

about verda paints

Painters Serving Painters!
Establish October 2007, Verda paints is a family owned manufacturing company dedicated to providing optimum quality paint. Favoured for our family feel and extensive knowledge of paint, we are painters by trade who understand the depths of quality painting. Employing seven of the most experienced paint specialists in the country, Verda is most reputable for providing the most superior products with exceptional results. With our enormous stock of indoor and outdoor paint products displayed in thousands of homes across Canada, Verda consistently provides customers with nothing but the best! One more reason to choose Verda Paints!

About our paint

Interior paint finishes
There are many different types of interior paint finishes, all of which refer to the final paint finish's reaction to light. A description of interior latex paints listed below.

Interior latex faints:
Flat / Matte
This type of paint does not consist of any real gloss or sheen, and reflects light instead of absorbing it. Typically recommended to new painters, it is easy to apply and has a forgiving quality known to hide surface imperfections, brush and roll on marks. Due to its propensity to absorb moisture and fade over time, Matte Finish paints are ideal for areas in the home that do not require frequent cleaning or are exposed to high humidity.


Eggshell
This type of paint is similar to a matte finish but known to elude a hint of glossy sheen. As with the Canvas Home Basics Line of Paint, Eggshell paint finishers are known to be interchangeable with matte paint consisting of minimum glow.

Satin Finish
This type of paint is considered the middle ground between Matte Finish and Semi-High Gloss Finish paint. Most designers discourage painters from using anything higher than Satin paint finish for any rooms apart from the bathroom and kitchen. This paint is not shiny but does have a smooth gloss. Satin Finish is not ideal for hiding surface imperfections as well as the Egg shell paint.


Semi-gloss / High-gloss
This type of pain is known to and the paint is known to discolour overtime due to their ability to reflect light instead of absorbing it and show many surface imperfections. Commonly used in the higher traffic areas and surfaces that require constant washing, these paints are usually chosen for trim, furniture, cabinets, kitchens and bathrooms.